R19 Wizard
Boat Design: C&C 37R
Designer: Robert Ball
Builder: C&C International (C&C Yachts) Ltd. (Canada)
Year Built: 1990
Order Date: December 1st, 1989
Molding Date: December 15th, 1989
Builders Certificate: February 20th, 1990
Displacement: 15,000 lbs./ 6,803 kgs.
Ballast: 6,750 lbs./ 3,060 kgs., lead
Beam: 12.58' / 3.83m
Draft: 8.16' / 2.49m
Length: 39.50' / 12.04m
Sail Area: 794 sq. ft. / 73.76 m2
Rig: Masthead Sloop
Home Port: GROSSE POINTE MI
Sail Number: 42684
HIN: ZCC37R19A090
"Wizard" is R19 in the 37R series.
37R No. 19 was first christened "Pivot IV" and was pretty much a standard 37R on completion except her keel had been lightened 500 lbs. by the factory and she had a modified main sheet arrangements with a 7:1 purchase and so an extra block and bail on the boom.
She was built with a removable Vee berth forward and was also fitted with pipe berths aft.
By 2012 she had been renamed "Wizard".
Kent 135% Dacron R/F Genoa
A few of the original documents from the factory when R19 was first built are included below:
Designer: Robert Ball
Builder: C&C International (C&C Yachts) Ltd. (Canada)
Year Built: 1990
Order Date: December 1st, 1989
Molding Date: December 15th, 1989
Builders Certificate: February 20th, 1990
Displacement: 15,000 lbs./ 6,803 kgs.
Ballast: 6,750 lbs./ 3,060 kgs., lead
Beam: 12.58' / 3.83m
Draft: 8.16' / 2.49m
Length: 39.50' / 12.04m
Sail Area: 794 sq. ft. / 73.76 m2
Rig: Masthead Sloop
Home Port: GROSSE POINTE MI
Sail Number: 42684
HIN: ZCC37R19A090
37R No. 19 was first christened "Pivot IV" and was pretty much a standard 37R on completion except her keel had been lightened 500 lbs. by the factory and she had a modified main sheet arrangements with a 7:1 purchase and so an extra block and bail on the boom.
She was built with a removable Vee berth forward and was also fitted with pipe berths aft.
By 2012 she had been renamed "Wizard".
Scott Law's C&C 37 "Wizard" (sail 42684) racing in fleet 2 at Texoma's 2012 Lakefest Regatta. Lake Texoma, Oklahoma–Texas border, USA. |
The details below were accurate as of February of 2012:
Rigging:
Rigging:
3 Spreader Aluminum Mast
Rod Rigging
Aluminum Spinnaker Pole
ProFurl Roller Furling Headstay
Sails:
Racing Mainsail
North #1 Genoa
North #2 Genoa
North #3 Genoa
North #4 Genoa
Storm Jib
Kent Dacron Cruising Mainsail
.5 Oz Spinnaker
.75 Oz Spinnaker
1.5 Oz Spinnaker
.75 Oz Cruising Spinnader (Symetrical) w/Snuffer
A few of the original documents from the factory when R19 was first built are included below:
Comments
Post a Comment